Others may offer you laminate flooring but one of the things that separate Baker Bros. is what we call the “art of installation”.
It’s a precisely planned, carefully controlled orchestration of craftsmen and materials, talent and tools, follow-up and clean-up.
And we know the art well. Because we manage hundreds of installations every week. Week in and week out. The fact is, nobody knows flooring installation better.
Which is why, when it comes to installing your laminate, we offer you…
More answers per square foot.
Answers that underline the fact that, with us, you never go it alone. And we have over 60 years of customer relationships to support that.
At Baker Bros., the place “Where Fashion Meets Flooring,” we have a reputation for always being there.
We also believe our guidance, and presence, doesn’t end at our showroom doors. It continues all the way through installation, and well after.
But our role now, in this section, is to help you be knowledgeable and prepared for the day when new laminate flooring will transform your home.
Being ready for the installation of your laminate will make the entire process go faster, more efficiently, and hopefully eliminate any “surprises.”
Knowing what to expect and being prepared will also be a lot less stressful on you, your family and your home.
So check out the information below, be flexible and anticipate, then look forward with confidence to the day your new laminate comes home.
While many people attempt to install laminate flooring on their own, this job is still difficult work, labor intensive and extremely exacting.
If you are not a seasoned DIYer, we strongly recommend you call upon Baker Bros. professionals to install your laminate floor.
That way you can be assured of a beautiful, efficient and correct installation. Which is precisely what our goal is for you.
However, while installing laminate flooring is a skill that is developed through years of experience, your understanding of the basics of installation will increase your knowledge of the process and enhance your confidence in the Baker Bros. professionals working in your home.
So please allow us to cover some of these basics with you.
Today there are many manufacturers producing laminate flooring products.
Most manufacturers have their own specific installation guidelines; however the overall process is the same. Understand this one and you’re done. Laminate floors use what is known as a “floating floor” installation. This means, the planks or tiles simply lay on top of the floor without being adhered to the subfloor and are only adhered to each other on the edges.
Side seams are either glued together or joined using a “glueless” installation where the planks or tiles tightly interlock together. Both installations are considered floating floors.
The first step our installers take is to closely inspect your subfloor for any imperfections. Should your subfloor require additional labor to allow us to meet the manufacturers requirements for installation, we will discuss this with you prior to any additional work being done. Please note that most manufacturers require a level subfloor with a tolerance of 3/16” every 10 feet.
While no floor is perfectly level, the subfloor should be checked for any noticeable gaps or ridges that could cause problems.
Our installers now put down an underlayment directly over your subfloor.
This underlayment allows the floor to expand and contract with changes in temperature and also acts as a sound and moisture barrier. Both good ideas.
In some installations, there are two underlayment layers.
The first layer is installed to specifically act as a moisture barrier while the second layer provides a sound barrier and enhances your flooring’s performance.
The underlayment is typically rolled out and taped together at the seams.
Our installers will cut the pieces of underlayment where needed with a precision utility knife to make a perfect fit.
Our installers will typically begin in the left corner of the area and leave a minimum 1/4" space between the flooring and the perimeter walls.
This is done because the laminate requires space around the edges of the room to expand or contract.
Without that “breathing room” your floor will express its discontent. If the floor is touching or too close to a wall, it can buckle in the middle.
Along the wall, our installers use spacers as they work, to ensure the accuracy of this perimeter space.
They use one spacer for each square foot. Once your floor is fully installed they remove the spacers and cover the perimeter gap with quarter round trim or a wall base.
As our installers lay the planks or tiles in the desired pattern, they will carefully measure and precisely cut them to fit.
As mentioned earlier, many laminates today don’t require glue for the installation.
These glueless products have significantly impacted the laminate flooring industry and there are several reasons why the glueless laminate floors are so popular.
Most importantly, they are easier to install. Our installers put down an underlayment and the laminate planks or tiles interlock to each other one at a time.
If something goes wrong during installation, your floor can be dismantled plank by plank, or tile by tile, and re-built.
If one of the panels gets damaged after installation, your entire floor can be removed, the damaged panel replaced, and the floor can be put back together again.
For floors that require glue on the sides of the planks or tiles, our installers begin by gluing the first two panels in the first row together.
Again, as per the manufacturer’s instructions, they start in the left-hand corner and glue the first row together at the ends.
As they glue each plank or tile they apply clamps or use straps to hold the pieces together.
Although planks or tiles usually fit together easily, installers will sometimes use a tapping block while fitting them together.
For installations that use glue, once the floor is completed and the glue is dry, installers then remove the spacers.
To finish your floor, our installers add molding to cover the perimeter gap and install any additional transition trim pieces needed in doorways or where the laminate meets a different type of flooring.
Custom finished moldings and trim will give your laminate flooring a beautiful, finished look. They are all coordinated to match or accentuate the design of your floor. It’s all available as a part of our professional installation, all part of the art of installation.
For your information, here are some finishing terms and definitions.
Reducer Strip is used to create a smooth transition between two floors of different heights, as well as protect the plank or tile exposed edges from damage caused by foot traffic.
Overlapping Stair Nosing is similar to a flush stair nosing except the nosing overlaps the exposed edge of your floor.
The overlapping stair nosing is secured to the sub floor and not to the laminate floor so the floor is free to move. Recall the “floating floor” idea we mentioned earlier in this section.
T-Molding is used to bridge two areas of flooring that are the exact same height.
The T-Molding overlaps the exposed edges of the floor and is secured only to the sub floor, never to the flooring itself.
Generally this trim is used as the transition piece between rooms, or as the expansion piece for areas that exceed 30 feet in length.
Universal Edge is also called Square Nosing and is used where the laminate flooring butts up to carpeting, or various vertical surfaces where the edge will be exposed, such as along a fireplace.
Quarter Round gives the floor a finished look and protects the edges of your laminate flooring.
The result is a beautiful, Baker Bros. installed laminate floor.
Remove all your furniture and other objects and materials from the areas where the installation will take place. Before moving, you’ll also need to empty the contents of china cabinets, closets and the like.
Be aware that the area of installation must be climate controlled (heated or air conditioned). Laminate flooring manufacturers require indoor humidity to be maintained between 45-65%.
Please consider how your old floor covering will be taken up and disposed of. This can be a time consuming task. We would be happy to discuss removal options with you.
If you prefer to remove your present floor covering, do it at least one day prior to arrival of your laminate product to allow for cleanup and floor preparation. If removing old carpet, please remove all materials, the tack strips and the pad, including staples.
You should know that, in many cases, moldings and baseboards need to be removed for laminate installation. Our installers will do this for an additional charge but will not be responsible for damage or breakage due to dry or brittle wood.
Painted baseboards, woodwork and paint may need retouching after the installation is complete. If necessary, this is your responsibility.
Your existing subfloor may need to be prepared to receive the laminate flooring, or a new subfloor may be required. This is a job best left to the professionals and, again, we can help you with these decisions.
It is important that the subfloor be as clean and level. That helps insure your new laminate flooring will be as beautiful and well supported as possible and ultimately covered by the manufacturer’s warranty.
When laminate flooring is installed, there’s always the possibility that the doors, especially closet doors, basement and bedroom doors, may not clear the new laminate and swing free.
Our installers will remove doors in order to install the laminate and re-hang them. If there is a clearance issue you may want to arrange for a qualified carpenter to shave or cut down your door(s) after the installation of your new laminate.
Installing new laminate flooring will produce waste. These materials will be collected and disposed of by our installers.
You should check with your retailer regarding the disconnection and removal of appliances. Some installers may disconnect and move your electrical appliances and furniture for an additional charge.
But prior arrangements should be made with your salesperson. For your safety, and that of your family, we recommend that the gas company or appliance company disconnect and reconnect all gas appliances.
Ask your retailer about the possibility and cost of disconnecting and reconnecting such items as icemakers, stereo equipment and computers; and the removal of heavy items like pianos.
Also, consult with your retailer to determine if there is a charge for the removal and replacement of toilets in bathrooms if that is necessary.
Be aware that the area of installation must be climate controlled (heated or air conditioned). Indoor humidity should be maintained between 45-65%
Be prepared to be at home the day of installation and be available in case our installation crew has questions. Your presence will insure that the correct laminate flooring is installed in the right areas. Because it is difficult to estimate the length and circumstances of each job, we may not be able to give you an exact time of arrival but we will provide a time frame.
Our installers will use a variety of tools and techniques that can make the work area hazardous. Please make sure that your children and pets are kept out of the work area on installation day. Your safety and your family’s is priority for our installation crew.
We recommend that, prior to the completion of the installation, you walk thru the job with our installation team. This will give you the opportunity to ask questions and be clear on any final details. Baker Bros. wants you to be completely satisfied with your new laminate flooring.
If you are sensitive to dust and odors, good ventilation should be established for 48 to 72 hours after installation.
We want you to be as well prepared as possible for the installation of your new laminate floor. To insure that, we offer a knowledgeable sales team and seasoned installers who will provide you with accurate information, dependable guidance and real world solutions.
For over 6 decades, Baker Bros. has helped thousands of customers prepare for installation day by offering them…
More answers per square foot.